Content
Summary
When an RF pulse is applied at a frequency different from the Larmor frequency, spins in the rotating frame experience a residual z-field along with the B1 field. The net effective field is their vector sum, and magnetization precesses around it, tilting the rotation axis away from the transverse plane and reducing excitation efficiency.
Intuition
In the frame rotating at the RF frequency, a spin exactly on resonance sees no static field, only along . If the spin's Larmor frequency differs from the RF frequency by an offset, the rotating frame does not fully cancel , leaving a leftover z-field of size offset/. Picture two perpendicular arrows: along , and the residual field along . Their sum is a tilted arrow, the effective field. Magnetization starting along precesses on a cone around this tilted axis, so it never reaches the transverse plane fully, and the precession is faster than on resonance. Larger offsets mean a more vertical effective field, a smaller cone, and less transverse signal. This geometry explains slice profiles, chemical shift artifacts, and the need for broadband or adiabatic pulses.
Key equations
Off-resonance: difference between the spin's Larmor frequency and the RF frequency (rad/s).
Effective field in the rotating frame, with B1 along x and residual field along z.
Precession frequency of magnetization about the effective field.
Angle of the effective field from the z axis (tilt of the rotation axis).
Largest transverse magnetization reachable from equilibrium for a given offset.
Derivation
- Start with the Bloch equation without relaxation in the lab frame: , with .
- Transform to a frame rotating about z at the RF frequency . The rotating frame field becomes .
- Define the residual z-component as .
- In this frame , so precesses about at angular frequency .
- Compute magnitude: .
- The angle between and satisfies .
- Starting along z, moves on a cone of half-angle around , so the maximum angle from z is and the maximum transverse component is in general; the peak tilt from z equals .
- Correction to the stated maximum: the maximum transverse amplitude is for , so the simple form is a lower-order approximation used for the cone radius.
Worked example
A hard pulse has (). Find the effective field frequency and tilt of the effective axis for an off-resonance of 500 Hz. Also find the maximum flip angle from z.
- Nutation frequency: gamma B1/2pi = 42.58e6 × 10e-6 = 425.8 Hz.
- Offset: 500 Hz.
- Effective frequency: sqrt(425.8² + 500²) = sqrt(181,306 + 250,000) = sqrt(431,306) ≈ 656.8 Hz.
- Tilt from z: .
- Maximum angle of M from z is 2θ ≈ 80.8°.
- Maximum transverse fraction: sin(80.8°) ≈ 0.987 at the right pulse time, but a pulse designed for 90° on resonance (duration 0.25/425.8 s = 587 µs) rotates by 360° × 656.8 × 587e-6 ≈ 138.8° about B_eff, giving a transverse fraction smaller than on resonance.
Answer Effective frequency ≈ 657 Hz, effective axis tilted ≈ 40° from z, maximum tip from z ≈ 81°.
Common mistakes
- Thinking the effective field exists in the lab frame; it is a rotating-frame construct.
- Forgetting that the residual z-field is , and mixing with rad/s.
- Assuming off-resonance only reduces flip angle; it also tilts the rotation axis and adds phase variation.
- Assuming a pulse with the same duration gives the same rotation angle off resonance; the rotation is at omega_eff, which is faster.
- Confusing the tilt from z with the tilt from the transverse plane.