Content
Summary
2D COSY (correlation spectroscopy) plots a 1H spectrum on both axes. Diagonal peaks reproduce the normal 1D spectrum, while off-diagonal cross-peaks connect protons that are scalar (J) coupled, usually through two or three bonds. Reading cross-peaks lets you trace the connectivity of a molecule.
Intuition
Picture the 1D spectrum laid along the horizontal axis and again along the vertical axis, so the plane is a square with a diagonal line of peaks. Each diagonal peak is a proton talking to itself. If proton A is coupled to proton B, magnetization is transferred between them during the mixing pulse, and two off-diagonal peaks appear at (δA, δB) and (δB, δA). These mirror each other across the diagonal, so the spectrum is symmetric. Geometrically, you draw a vertical line from a diagonal peak, draw a horizontal line from another, and a cross-peak sits where the lines meet a coupled pair. Following a chain of such squares walks you along the carbon skeleton: A to B, B to C, and so on. No cross-peak means no resolvable coupling, typically protons more than three bonds apart.
Key equations
Cross-peak signal: magnetization labeled by A's frequency in t1 and detected at B's frequency in t2, with amplitude depending on J.
Cross-peak coordinates for coupled protons A and B; they are symmetric about the diagonal.
Diagonal peak position for proton A.
Derivation
- Start with the pulse sequence: 90° pulse, evolution time t1, second 90° pulse, then acquisition during t2.
- During t1, the spin A transverse magnetization precesses at its offset frequency and is modulated by coupling to B.
- The antiphase component of A (proportional to ) is generated by the J evolution.
- The second 90° pulse converts antiphase A coherence into antiphase B coherence, transferring it between the spins.
- In t2, this coherence evolves at B's frequency, so the signal is labeled A in t1 and B in t2.
- Fourier transform in both t1 and t2 gives a peak at (δA, δB); the reverse pathway gives (δB, δA).
- Coherence that stays on A gives diagonal peaks at (δA, δA).
Worked example
A COSY spectrum of ethanol shows diagonal peaks at 1.2 ppm (CH3), 3.7 ppm (CH2) and 2.5 ppm (OH, exchanging). Cross-peaks appear at (1.2, 3.7) and (3.7, 1.2) only. What do they tell you?
- Identify the diagonal peaks: three distinct proton environments.
- Find the off-diagonal pair: (1.2, 3.7) and (3.7, 1.2), mirror images across the diagonal.
- Conclude that CH3 and CH2 protons are J coupled, three bonds apart (H-C-C-H).
- Note the OH has no cross-peak because rapid chemical exchange averages out its coupling.
- Assemble the fragment: CH3-CH2- with OH attached to the CH2 carbon.
Answer The cross-peaks show the CH3 and CH2 are coupled neighbors, forming an ethyl group; OH shows no correlation due to exchange.
Common mistakes
- Treating diagonal peaks as correlations; they only repeat the 1D spectrum.
- Forgetting that cross-peaks come in symmetric pairs, so a lone asymmetric peak is likely noise or an artifact.
- Assuming a cross-peak means spatial closeness; that is NOESY. COSY shows through-bond coupling.
- Expecting cross-peaks over long distances; usually only 2-3 bond couplings are visible.
- Reading the peaks from the wrong axis, mixing up which shift belongs to which proton.