Physics · Introductory

Common Forces

Written by SignalsLab

Early edition: these lessons are being reviewed.

Content

Summary

This lesson explains the normal force as a reactive support force arising from microscopic elastic deformation, distinct from weight, and introduces tension as a pulling force in flexible connectors. It details how to resolve weight components on an incline using rotated coordinates to calculate normal force and acceleration. The content emphasizes that normal force magnitude and direction depend on the surface orientation and external forces, while tension remains uniform in ideal low-mass ropes.

Intuition

Imagine a table supporting a bag of dog food. The table doesn't just magically hold it up; it physically sags at a microscopic level, acting like a stiff spring. This elastic deformation creates a restoring force that pushes back against the bag. This push is the normal force, and it is strictly perpendicular to the surface. If you push down on the bag, the table sags more, and the normal force increases to match. Similarly, tension is like a rope being stretched; it can only pull, never push, and transmits force uniformly along its length. On a slope, gravity pulls straight down, but we must split this pull into two parts: one pushing into the slope (balanced by the normal force) and one sliding down the slope (causing acceleration).

Key equations

N=mgcos⁡θ
(1)

The magnitude of the normal force on an incline with angle θ, where there is no acceleration perpendicular to the surface.

w⊥=mgcos⁡θ
(2)

The component of weight perpendicular to an incline of angle θ.

w∥=mgsin⁡θ
(3)

The component of weight parallel to an incline of angle θ.

a=gsin⁡θ
(4)

The acceleration of an object sliding down a frictionless incline, independent of mass.

a=gsin⁡θ−fm
(5)

The acceleration of an object sliding down an incline with friction force f.

Derivation

  1. Identify the coordinate system for an incline: rotate axes so one is parallel to the slope and one is perpendicular.
  2. Resolve the weight vector (mg) into perpendicular (wperp) and parallel (wparallel) components using trigonometry based on the incline angle θ.
  3. Apply Newton's Second Law in the perpendicular direction: since there is no acceleration perpendicular to the surface, the net force is zero.
  4. Equate the normal force (N) to the perpendicular weight component: N=w⊥=mgcos⁡(θ).
  5. Apply Newton's Second Law in the parallel direction: F_net = ma.
  6. For a frictionless incline, Fnet=wparallel=mgsin⁡(θ), leading to a=gsin⁡(θ).
  7. For an incline with friction, Fnet=mgsin⁡(θ)−f, leading to a=gsin⁡(θ)−f/m.

Worked example

Problem

A skier with a total mass of 60.0 kg is on a slope. If friction is negligible, what is the acceleration down the slope? If a resistive friction force of 45.0 N is present, what is the new acceleration? (Assume an incline angle θ where sin⁡(θ) is known, or leave in terms of θ for the first part).

  1. For the frictionless case, use the derived formula a=gsin⁡(θ). The mass cancels out, so the acceleration depends only on gravity and the angle.
  2. For the case with friction, identify the forces parallel to the slope: the downward component of weight (mgsin⁡(θ)) and the upward friction force (f=45.0 N).
  3. Calculate the net force: Fnet=mgsin⁡(θ)−f.
  4. Apply Newton's Second Law: a=Fnetm=mgsin⁡(θ)−fm.
  5. Simplify to a=gsin⁡(θ)−f/m.

Answer Frictionless: a=gsin⁡(θ). With friction: a=gsin⁡(θ)−45.0/60.0 m/s2.

Common mistakes

  • Assuming the normal force always equals the object's weight; it only equals weight on a horizontal surface with no other vertical forces.
  • Assuming the normal force always points vertically upward; on an incline, it points perpendicular to the surface.
  • Confusing the variable N (normal force, a vector) with the unit N (newton, a scalar).
  • Thinking ropes can push; tension is exclusively a pulling force.
  • Misidentifying sine and cosine components for weight on an incline; cosine is for the perpendicular component, sine for the parallel.

Animation

Animation coming soon

The animated version of this lesson is being prepared for the web. In the Signals AI app, lessons are drawn step by step.

Code

This is a text lesson: it has no animation code yet.

ccBYNC© 2026 SignalsLab. Lesson text shared as is under CC BY-NC 4.0.