Content
Summary
Faraday's law of induction states that a changing magnetic flux through a circuit induces an electromotive force (emf) in it. The size of the emf equals the rate of change of flux, and Lenz's law fixes its direction so that it opposes the change. This underlies generators, transformers, and many medical devices such as MRI and transcranial magnetic stimulation.
Intuition
Magnetic flux counts how much magnetic field threads through a loop. If that count changes, because the field strengthens, the loop moves, or the loop rotates, charges in the wire feel a push and a voltage appears. Nothing is induced if the flux is steady, however strong the field. Nature resists change: the induced current creates its own field that opposes the change in flux. That is why a magnet falling through a copper tube slows down, and why the minus sign appears in the law.
Key equations
Magnetic flux through a surface; for a uniform field and a flat loop, it depends on field strength , area , and the angle between and the loop normal.
Faraday-Lenz law: the induced emf in a coil of N turns equals minus the rate of change of flux; the minus sign encodes Lenz's law.
Induced current in a loop of resistance R, from Ohm's law.
Motional emf of a rod of length l moving at speed v perpendicular to a uniform field B.
Derivation
- Start with a rod of length l sliding at speed v along rails in a uniform field B perpendicular to the plane of the circuit.
- Enclosed area changes as , so the flux changes at .
- Check with the Lorentz force: a charge q in the rod feels force qvB along the rod, so work per unit charge over length l is vBl, which is the emf.
- Both routes give emf = , matching the magnitude of , which motivates the general law.
- The sign: the induced current must produce a magnetic force on the rod opposing its motion (otherwise energy would be created from nothing), so emf = .
- For N tightly wound turns, the same flux threads each turn, so the emfs add: .
Worked example
A circular coil of 50 turns and radius 4.0 cm sits with its axis parallel to a uniform magnetic field. The field increases uniformly from 0.20 T to 0.80 T in 0.30 s. The coil resistance is 5.0 ohms. Find the induced emf and current.
- Area .
- Change in flux per turn = (0.80 - 0.20)(5.03 x 10^-3) = 3.02 x 10^-3 Wb.
- Rate of change = 3.02 x 10^-3 / 0.30 = 1.01 x 10^-2 Wb/s.
- Emf magnitude = N times rate = 50 x 1.01 x 10^-2 = 0.503 V.
- Current = 0.503 / 5.0 = 0.10 A.
- Direction: the current produces a field opposing the increase, so it flows to create a field opposite to the applied one.
Answer Emf is about 0.50 V and current is about 0.10 A, with direction opposing the increase in flux.
Common mistakes
- Thinking a strong steady field induces an emf; only a changing flux does.
- Forgetting the number of turns N.
- Ignoring the angle: flux depends on the component of perpendicular to the loop, so use .
- Reading Lenz's law as opposing the field itself rather than opposing the change in flux.
- Mixing up flux, which is Phi, with its rate of change, which gives emf.
- Using degrees versus radians incorrectly when changes with time, for example .