Content
Summary
When coherent light passes through two narrow slits, the two waves overlap and add. Where they arrive in phase we see bright fringes, and where they arrive out of phase we see dark fringes. The fringe spacing depends on wavelength, slit separation and screen distance.
Intuition
Think of two stones dropped into a pond side by side. Ripples spread from each and cross. At some points crests meet crests and the water rises strongly; at others a crest meets a trough and the water stays flat. Light behaves the same way. Each slit acts as a new source of waves. A point on the screen is slightly farther from one slit than the other, and this path difference decides whether the waves reinforce or cancel. If the path difference is a whole number of wavelengths, the waves are in phase and we get brightness. If it is a half-integer number of wavelengths, they cancel. Because the path difference grows steadily as you move across the screen, you see an evenly spaced pattern of stripes.
Key equations
Path difference between the two waves for slit separation at angle from the central axis.
Condition for constructive interference (bright fringes).
Condition for destructive interference (dark fringes).
Position of the m-th bright fringe on a screen at distance L, for small angles.
Spacing between adjacent bright fringes.
Intensity pattern for two ideal narrow slits, each alone giving intensity .
Derivation
- Place two slits a distance d apart, and a screen a distance L away, with L much larger than d.
- For a point on the screen at angle , the rays from the two slits are nearly parallel. The lower ray travels an extra distance .
- The phase difference is .
- Add two waves of equal amplitude : .
- Intensity is proportional to the amplitude squared, so .
- Bright fringes occur when , which gives .
- For small angles, , so .
- Subtracting neighboring positions gives the spacing .
Worked example
Light of wavelength 600 nm passes through two slits 0.30 mm apart. The screen is 2.0 m away. Find the fringe spacing and the position of the third bright fringe from the center.
- Convert units: lambda = 600e-9 m, d = 0.30e-3 m, L = 2.0 m.
- Spacing: Delta y = lambda L / d = (600e-9)(2.0)/(0.30e-3).
- Numerator: 1.2e-6. Divide by 3.0e-4 to get 4.0e-3 m.
- Third bright fringe: y_3 = 3 × 4.0 mm = 12 mm.
Answer Fringe spacing 4.0 mm; the third bright fringe is 12 mm from the center.
Common mistakes
- Using the slit width instead of the slit separation d in the formulas.
- Forgetting that m = 0 is the central bright fringe, so the first bright fringe is m = 1.
- Applying the small-angle formula when the angle is large.
- Mixing units, such as nanometers with millimeters.
- Confusing the dark fringe condition, which needs a half-integer, with the bright one.
- Thinking that light particles collide; the pattern comes from wave superposition.