Chemistry · Intermediate

Distillation Separation Theory

Written by SignalsLab

Early edition: these lessons are being reviewed.

Content

Summary

Distillation separates mixture components based on volatility differences, where the distillate composition mirrors the vapor phase. This process is governed by Raoult’s law for partial pressures and Dalton’s law for total pressure, linking liquid composition to vapor behavior. Understanding the inverse relationship between boiling point and vapor pressure is essential for predicting separation outcomes.

Intuition

Think of distillation as a selective escape game for molecules. When you heat a liquid mixture, molecules with weaker intermolecular forces (IMFs) have an easier time breaking free into the gas phase. These are typically the molecules with lower boiling points. Because the vapor phase is richer in these volatile components, condensing that vapor yields a distillate that is more concentrated in the more volatile substance than the original liquid. However, this separation is not perfect; if components have similar volatilities, the distillate will not be highly pure. The mathematical framework relies on the idea that each component contributes to the total pressure based on its abundance in the liquid and its inherent tendency to vaporize.

Key equations

PA=XAPA∙
(1)

Raoult's Law: The partial vapor pressure of component A equals its mole fraction in the liquid multiplied by the vapor pressure of pure A.

Ptotal=PA+PB
(2)

Dalton's Law: The total pressure is the sum of the partial pressures of components A and B.

Ptotal=XAPA∙+XBPB∙
(3)

Combined expression for a binary miscible system, showing total pressure depends on both pure vapor pressures and liquid mole fractions.

Derivation

  1. Start with Raoult's Law, which states that the partial pressure of a component in a mixture is proportional to its mole fraction in the liquid phase: PA=XAPA∙.
  2. Apply Dalton's Law of Partial Pressures, which states that the total pressure of a gas mixture is the sum of the individual partial pressures: Ptotal=PA+PB.
  3. Substitute the expression for PA and PB from Raoult's Law into the Dalton's Law equation.
  4. This yields the combined equation for a binary system: Ptotal=XAPA∙+XBPB∙.
  5. Conclude that total vapor pressure and vapor composition depend on both the intrinsic vapor pressures of the pure components and their respective mole fractions in the mixture.

Worked example

Problem

Compare the vapor pressures of diethyl ether and toluene at 20 °C to determine which is more volatile.

  1. Identify the boiling points: Diethyl ether boils at 34.6 °C, while toluene boils at 110.6 °C.
  2. Apply the principle that lower boiling points correspond to weaker intermolecular forces and higher vapor pressures at a given temperature.
  3. Check the provided data: Diethyl ether has a vapor pressure of 439 mmHg, and toluene has a vapor pressure of 22 mmHg at 20 °C.
  4. Conclude that diethyl ether is significantly more volatile due to its much higher vapor pressure and lower boiling point.

Answer Diethyl ether is more volatile than toluene at 20 °C, as evidenced by its higher vapor pressure (439 mmHg vs. 22 mmHg) and lower boiling point (34.6 °C vs. 110.6 °C).

Common mistakes

  • Assuming vapor pressure increases linearly with temperature; the relationship is actually non-linear.
  • Confusing the relationship between boiling point and vapor pressure; lower boiling points correlate with higher vapor pressures, not lower.
  • Assuming distillation always yields highly pure samples; it may not, especially when components have similar volatilities.

Animation

Animation coming soon

The animated version of this lesson is being prepared for the web. In the Signals AI app, lessons are drawn step by step.

Code

This is a text lesson: it has no animation code yet.

ccBYNC© 2026 SignalsLab. Lesson text shared as is under CC BY-NC 4.0.