Content
Summary
Crystallization purifies solids by exploiting solubility differences, requiring the target compound to be highly soluble in hot solvent and minimally soluble in cold solvent. Soluble impurities remain in the mother liquor during cooling, while insoluble impurities are removed via hot filtration before crystallization begins.
Intuition
Think of crystallization as a selective trapping mechanism based on temperature. Most solids dissolve better when heated, so we use a minimum amount of hot solvent to dissolve our impure solid. This releases impurities trapped in the crystal structure. If an impurity dissolves completely, it stays in the liquid (mother liquor) when we cool the mixture, allowing pure crystals to form. If an impurity does not dissolve at all, we must filter it out while the solution is still hot, before any crystals form. The process fails if the compound is too soluble even when cold, as it will not crystallize out.
Derivation
- Identify the solubility profile of the desired compound and impurities.
- Select a solvent where the compound is highly soluble in hot conditions and minimally soluble in cold conditions.
- Dissolve the impure solid in the minimum amount of hot solvent to liberate trapped impurities.
- If insoluble impurities are present, perform hot filtration to remove them before cooling.
- Cool the solution to reduce solubility, inducing crystallization of the desired compound.
- Soluble impurities remain dissolved in the mother liquor during this cooling phase.
- Collect the purified solid via suction filtration, leaving impurities behind.
Worked example
A student has a solid mixture containing a target compound and a small amount of insoluble charcoal dust. The target compound is highly soluble in hot ethanol but slightly soluble in cold ethanol. The charcoal is insoluble in ethanol at both temperatures. Describe the correct procedure to purify the target compound.
- Heat the ethanol solvent.
- Add the impure solid to the hot ethanol using the minimum amount required for full dissolution.
- Perform hot filtration immediately to remove the insoluble charcoal dust.
- Allow the filtered hot solution to cool slowly.
- As the solution cools, the target compound's solubility decreases, causing it to crystallize.
- The soluble impurities (if any) remain in the cold ethanol (mother liquor).
- Collect the purified crystals using suction filtration.
Answer Dissolve in minimum hot ethanol, filter hot to remove charcoal, cool to crystallize, and filter to collect pure solid.
Common mistakes
- Assuming all solids can be crystallized from any solvent; some solids are highly soluble even at cold temperatures and cannot be crystallized from those solvents.
- Confusing the handling of soluble versus insoluble impurities; soluble impurities stay in solution during cooling, while insoluble impurities must be filtered out while hot.