Content
Summary
In consecutive reactions A → B → C, the intermediate B is formed by the first step and consumed by the second, so its concentration rises, reaches a maximum, then falls. The timing of that maximum and its height depend on the ratio of the two rate constants.
Intuition
Picture water flowing from an upper tank (A) through a pipe into a middle tank (B), which drains into a lower tank (C). At first the middle tank is empty, so little drains out and its level rises. As the upper tank empties, inflow shrinks while outflow grows with the level in B. Eventually outflow beats inflow and B falls. If the outlet of B is much wider than the inlet (k2 >> k1), B never accumulates and stays small and nearly steady. If the inlet is wider (k1 >> k2), B builds up almost fully before slowly converting to C. The slower step is the bottleneck that controls how fast C appears.
Key equations
A decays by first-order kinetics.
B is made from A and lost to C.
Concentration of the intermediate over time (k1 ≠ k2).
Time at which B is at its maximum.
Mass balance gives the product.
Derivation
- Solve the first step: [A]=[A]0 e^{-k1 t}.
- Substitute into d[B]/dt = k1[A]0 e^{-k1 t} - k2[B], a linear first-order ODE.
- Use the integrating factor e^{k2 t}: d([B]e^{k2 t})/dt = k1[A]0 e^{(k2-k1)t}.
- Integrate from 0 with [B]=0 at t=0: [B]e^{k2 t} = k1[A]0 (e^{(k2-k1)t}-1)/(k2-k1).
- Multiply by e^{-k2 t} to get [B]=k1[A]0(e^{-k1 t}-e^{-k2 t})/(k2-k1).
- Set d[B]/dt=0, so k1[A]=k2[B]; this gives k1 e^{-k1 t}=k2 e^{-k2 t}, hence t_max=ln(k2/k1)/(k2-k1).
- Find [C] from conservation: [C]=[A]0-[A]-[B].
Worked example
For A → B → C with k1 = 0.10 s^-1 and k2 = 0.40 s^-1, and [A]0 = 1.00 M, find t_max and [B] at t_max.
- t_max = ln(0.40/0.10)/(0.40-0.10) = ln4/0.30 = 1.386/0.30 = 4.62 s.
- e^{-k1 t} = e^{-0.462} = 0.630.
- e^{-k2 t} = e^{-1.848} = 0.158.
- Prefactor: k1[A]0/(k2-k1) = 0.10/0.30 = 0.333 M.
- [B]max = 0.333 × (0.630 - 0.158) = 0.333 × 0.472 = 0.157 M.
Answer t_max ≈ 4.6 s and [B]max ≈ 0.16 M
Common mistakes
- Assuming the intermediate keeps rising until A is gone; B peaks while A is still present.
- Using the formula when k1 = k2, where it is undefined; the limit is [B]=k[A]0 t e^{-kt}.
- Thinking the faster step controls the overall rate of C formation; the slower step does.
- Applying the steady-state approximation when k2 is not much larger than k1.
- Forgetting that [A]+[B]+[C] stays constant.